Pick and choose any combination of M9, M10, or 3/8″ solid axle nuts. This product contains at least one locking nut, and up to two keys.
Choose any combination of these three options:
- Set #M1: intended for any 10MM x 1MM threaded axle (an outside axle diameter of 10mm, and a thread pitch of one millimeter.) This includes Rohloff TS Speedhubs, NuVinci / Enviolo (n330, n360 and n380), Miche Primato Pista, SRAM Automatix, and SRAM DD3 hubs.
- Set #SH38: intended for Shimano Alfine and Nexus rear hubs, or other solid axle hubs that use a 3/8″ x 26TPI threaded axle (an outside axle diameter of 3/8″, and a thread pitch of 26TPI.)
- Set #SH90: intended for Shimano’s bolt-on front hubs, or other hubs with 9MM x 1MM axles (an outside axle diameter of 9MM, and a thread pitch of 1MM.)
Pitlock’s solid axle nuts use the same technology as their quick release counterparts, but they are considerably larger. Because of the size difference, if you decide to use these nuts in conjunction with a Pitlock seatpost or ahead bolt, you will need to use two different keys.
Because of their size, these bolts require a surface area 30.2MM in diameter for installation.