www.urbanbiketech.com

This is the most popular package in Pitlock's lineup.  This set is designed to protect the four most stolen parts on your bicycle: wheels, seat, and fork.

The locking wheel skewers use the well-regarded Pitlock locking mechanism to ensure that commuter and high-end wheelsets alike stay on your bike instead of in a thief's hands.  

The Pitlock Ahead Lock locking top cap is designed to fit just about any bicycle with a threadless headset.  Consider that a fork with a threadless steertube can be stolen simply by loosening the headset top cap and the stem bolts, and you'll see why it is so important to not only lock your front wheel to your fork, but also lock the fork to the frame.  Available in both black and silver, the Pitlock Ahead Lock looks good, but works even better.

Rest assured that your seat will stay where it is with Pitlock's locking seatpost skewer.  Using the same locking mechanism as the Pitlock wheel skewers it cheerfully protects your seat from would-be thieves.

All Pitlock parts with exception of the Ahead Lock are cold-forged and CNC machined from high-grade stainless steel.  The Ahead Lock uses the same steel for the bolt, but in order to save weight, the top can is machined in aluminum.

• Standard rear skewer fits dropouts up to 155mm (95% of bikes) - 48g
• Standard front skewer fits dropouts up to 119mm (95% of bikes) - 43g
• Standard seapost fits clamps up to 33mm wide (note - clamping surfaces must be parallel)
• Standard Ahead locking top cap fits 1-1/8" (1.125") steerer-tubes
• If your dropouts are wider than the standard skewer will accept, or if your fork's steer tube is 1" or 1-1/4", have no fear!  The Add to Shopping Cart section lets you pick and choose your skewer length and top cap size and color.
• If your seatpost clamp's clamping surfaces aren't roughly parallel, you may wish to take a look at the Pitlock seat post clamps in the accessories section.